Knygos.lt klubas Knygos.lt nariams
55,36 €
-30%
Įprastai
79,09 €
Modeling of cryogenic sloshing including heat and mass transfer
Modeling of cryogenic sloshing including heat and mass transfer
Knygos.lt klubas Knygos.lt nariams
55,36 €
-30%
Įprastai
79,09 €
  • Išsiųsime per 12–18 d.d.
Sloshing of cryogenic liquid propellants in launch vehicle tanks creates unwanted thermodynamic side-effects such as pressure changes in the tank. The goal of this PhD research was to develop a practical engineering model which is able to describe the influence of the sloshing of a cryogenic liquid on the heat and mass transfer and the associated temperature and pressure. The pressure changes caused by sloshing were investigated experimentally and numerically. Using the experimental and numeric…
  • Leidėjas:
  • ISBN-10: 3954046539
  • ISBN-13: 9783954046539
  • Formatas: 14.8 x 21 x 1.1 cm, minkšti viršeliai
  • Kalba: Anglų

Modeling of cryogenic sloshing including heat and mass transfer (el. knyga) (skaityta knyga) | knygos.lt

Atsiliepimai

Aprašymas

Sloshing of cryogenic liquid propellants in launch vehicle tanks creates unwanted thermodynamic side-effects such as pressure changes in the tank. The goal of this PhD research was to develop a practical engineering model which is able to describe the influence of the sloshing of a cryogenic liquid on the heat and mass transfer and the associated temperature and pressure. The pressure changes caused by sloshing were investigated experimentally and numerically. Using the experimental and numerical results, a one dimensional (1D) engineering model was developed which is able to describe the experimental results.

Knygos.lt klubas
Knygos.lt nariams
55,36 €
-30%
Įprastai
79,09 €
Kaina registruotiems pirkėjams
Prisijunkite ir už šią prekę
gausite 0,79 Knygų Eurų!?
Išsiųsime per 12–18 d.d.
Įsigykite dovanų kuponą
Daugiau
  • Autorius: Arnold van Foreest
  • Leidėjas:
  • ISBN-10: 3954046539
  • ISBN-13: 9783954046539
  • Formatas: 14.8 x 21 x 1.1 cm, minkšti viršeliai
  • Kalba: Anglų

Sloshing of cryogenic liquid propellants in launch vehicle tanks creates unwanted thermodynamic side-effects such as pressure changes in the tank. The goal of this PhD research was to develop a practical engineering model which is able to describe the influence of the sloshing of a cryogenic liquid on the heat and mass transfer and the associated temperature and pressure. The pressure changes caused by sloshing were investigated experimentally and numerically. Using the experimental and numerical results, a one dimensional (1D) engineering model was developed which is able to describe the experimental results.

Atsiliepimai

  • Atsiliepimų nėra
0 pirkėjai įvertino šią prekę.
5
0%
4
0%
3
0%
2
0%
1
0%
(rodomas nebus)